10 Pieces of Advice on How to Install Rubber Roofing


10 Pieces of Advice on How to Install Rubber Roofing

The roof is one of the important parts of the house. That is why you have to pay special attention to its creation and use only proven materials. However, new products that you should not be afraid to use appear every day. According to recommended roofers, the rubber will be an ideal covering for a flat roof. If such a roof is laid correctly, it will last for many years. We tell you how to do it.

Characteristics of Rubber Roofing

The very word rubber speaks of flexibility, strength, and water-repellent properties. The raw ingredients from which the roofing material is made greatly affect its characteristics, so let us see what advantages the material has:

  • Durability — rubber can stretch and shrink without loss of original qualities for an extended period.
  • Weather resistance – Frost and the scorching sun will not spoil the roof. It withstands wind, heavy rains, and even hail.
  • Ease of installation – lightweight material is easy to work with. Besides, the roof structure itself does not become heavier and does not put pressure on the walls and foundation of the house.
  • Environmental friendliness – such roofing does not emit hazardous substances and is not harmful to health. The only negative moment can be the smell of rubber, which will disappear in several days.

This roofing material neither rots nor deforms for a long time. An additional plus of a rubber roof is that it does not rattle during thunderstorms and hail, which means that silence and peace will not be disturbed in your house.

10 Pieces of Advice on How to Install Rubber Roofing
The Process and Useful Advice

If you have chosen the rubber roofing, follow this procedure:

  1. Thoroughly clean the roof of debris. Wet areas should be dried before the procedure.
  2. Remove all gutters and other items from the roof. Raise rolls of self-adhesive rubber roofing onto the roof.
  3. Using a ruler, cut the rubber to size, leaving at least five cm for overlap between the sheets themselves and at the junction.
  4. Apply a primer to the roof surface. It must be scorched. If this is not the case, let it dry for 1-1.5 hours.
  5. Expand the cut rubber sheets on top. Peeling off the backing, attach the sticky part of the rubber to the roof. Make sure that the sheet goes smoothly and immediately smooth out all wrinkles and folds. Work quickly – the glue sets instantly!
  6. Lay the second sheet of rubber overlapping the first. You may need a heated air gun with a fishtail nozzle to glue the sheet joints together. Roughen the overlap seams with a roller to ensure a good bond.
  7. Cut a strip of rubber to attach to the drain board over the gutter brackets. Make an overlap on the roof and press it with a wooden lath.
  8. Nail the rail to secure the sheet. Roll the sheet up through the rail and glue it to the roof. Smooth out to avoid wrinkles and creases. Press the seam with a blowgun and smooth with a roller.
  9. In places where the roofing material is adjacent to the wall, wrap the rubber on the wall and fix it with a metal strip screwed to the wall.
  10. Treat the joints with silicone sealant.  

Rubber roofing has enough positive aspects to pay attention to it. In addition, such a roof does not require careful treatment — even in harsh conditions, chips and cracks do not form.

#buttons=(Accept !) #days=(7)

Our website uses cookies to enhance your experience. Learn More
Accept !